Made in UAE
Lasting quality and durability
10 sec - 3 min Delay Timer
Smart timer algorithm inside
Smart Chip
Delivering 7 types of power protection
Preventing Fire Incidents
Keeping you and your loved ones safe
Meet Powermatic
Micro Automation Industries developed Powermatic, the new concept in power protection, it connects load only after a comprehensive monitoring of electrical supply and when the supply is within the specified parameters. It continues monitoring and disconnects when there are any disturbances, thus it avoids expensive damage and breakdown to connected equipment.

Powermatic, as a microprocessor embedded solution, provides the smartest comprehensive detection and reaction response to more than one power disturbances at low cost.
Working Principle
After the main power supply (Mains) is switched ON, Powermatic will monitor the Mains and withhold it from reaching the connected equipment. If the Mains is stable (Yellow state), Powermatic continues to monitor the power quality for a certain determined time.

If the power quality is within the limits, Powermatic will then connect Mains to the equipment (Green state). However, Powermatic will continue to monitor power quality.

Powermatic disconnects whenever it detects power disturbances beyond preset limits (Red state).

When Mains resumes stable, Powermatic continues monitoring the power quality and reconnects Mains to the equipment after determined time.
STOPS 7 TYPES
OF POWER DISTURBANCES
Built to a Sustainable Solution

Product Specifications

Type P30M-25 P30M-26
Power Standard 230V ~ 50Hz 220V ~ 60Hz
Continuous Load Current 30 Amp
Waiting Time 30 sec.
Over Voltage Connect 255V
Under Voltage Connect 180V
Interruption Response Time 20 millisec.
Max. Supply 420V
Inrush Current 100A
Max. Load(1 sec.) 60A
Surge Response Time <10ns
Surge Clamping Voltage 1120@25 Ampere(8/20 µs surge)
Max. Ambient Temperature 55°C
Connection Type Cable Termination(80cm)
Unit Weight 330gm.
Unit Dimension(H x W x D) 120 x 72 x 39mm
Packing Option Blister Shell(BS)